Checking The Sat Radio Id Number; Storing Channel Presets; Receiving Stored Channels; Storing The Desired Sports Team (Sirius Only) - Alpine IDA-X001 Owner's Manual

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this number.
This number is an 8 character (for XM Radio) or 12 character (for
SIRIUS Radio) alphanumeric number. It is printed on a label found on
the SAT Receiver.
It can also be displayed on the screen of the iDA-X001 in the following way.
XM:
1
While receiving a XM Radio band, press
to select channel "0" for XM.
2
To cancel the ID number display, select the channel
other than "0."
SIRIUS:
1
While receving a SIRIUS Radio band, press
to select channel "255" for SIRIUS.
2
To cancel the ID number display, set the channel to
other than "255".
• You cannot use "O," "S," "I," or "F" for the ID Number (XM radio
Receiver only).
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.

Storing Channel Presets

1
Press BAND to select the desired band you want to
store.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Center Jog Dial to select the preset
number.
4
Press and hold ENT for at least 2 seconds.
The selected station is stored.
5
Repeat the procedure to store up to 5 other channels
onto the same band.
• To use this procedure for other bands, simply select the band desired
and repeat the procedure.
• A total of 18 channels can be stored in the preset memory (6 channels
for each band; XM-1, XM-2 and XM-3 or SIRIUS-1, SIRIUS-2 and
SIRIUS-3).
• If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
24
-EN

Receiving Stored Channels

1
Press BAND to select the desired band.
2
Press PRESET.
The Preset screen is displayed.
3
Turn the Center Jog Dial to select a radio station.
4
Press ENT.
or

Storing the desired Sports Team (SIRIUS only)

Store a favorite team from one of the available leagues SIRIUS covers.
Once stored, game times and scores for that team are announced using
the interruption Alert display while receiving other programming. To
or
receive these announcements, refer to page 25.
This function becomes effective after performing the following two
operations.

Storing while receiving a game broadcast

1
Select the channel broadcasting your favorite team's
game.
2
Press FUNC./SETUP to activate the Function
mode.
3
While selecting Alert Memory, press ENT to activate
the Memory mode.
4
Turn the Center Jog Dial to select the desired team
for the game being broadcast, and then press
ENT.
5
Turn the Center Jog Dial to select alert type, and
then press ENT.
Initial (Initial setting)
Initial:
Update:
6
Press FUNC./SETUP or BACK to cancel the
Function mode.
Update
The Alert display interrupts when the game
begins.
The Alert display interrupts by game
progress (change of score, game result,
etc.).