Grizzly ART 4032 Lion Translation Of The Original Instructions For Use page 64

GB
• Before each use, check the
charger, cable and plug and
have them repaired by quali-
fied professionals and only
with original parts. Do not use
a defective charger and do not
open it up yourself. This ensures
that the safety of the device is
maintained.
• Connect the charger only to
a socket with an earth. En-
sure that the mains voltage
matches the specifications on
the charger rating plate. Risk of
electric shock.
Disconnect the charger from
•
the mains before closing or
opening connection to the bat-
tery / power tool / device.
• Keep the charger clean and
away from wet and rain. Do not
use the charger outdoors. Dirt
and the entry of water increase
the risk of electric shock.
Operate the charger only with
•
the appropriate original batter-
ies. Charging other batteries may
result in injuries and risk of fire.
Avoid mechanical damage to the
•
charger. This can result in internal
short circuits.
Do not operate the charger on
•
a combustible surface (e.g. pa-
per, textiles). Risk of fire due to
heating during charging.
• If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualified per-
son in order to prevent hazards.
• The battery of the appliance is
not fully charged at the time of
delivery. It therefore needs to be
64
fully recharged before you use
it for the first time. For the first
recharge cycle we recommend
that you charge the battery for
about 5 hour. Slot the battery into
the base and plug the battery
charger into a mains outlet.
• When the battery is fully charged,
unplug the charger from the mains
and from the appliance. Charging
time is approx. 5 hour.
• Do not charge the battery con-
tinuously since this may damage
the battery cells. Note: Repeat-
edly charging small capacities
may damage the battery cells.
Recharge the battery only if the
appliance is becoming slow.
• Do not use the charger to charge
non-rechargeable batteries.
9) RESIDUAL RISKS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by swing-
ing your hands and arms when operating
the appliance for longer periods of time
or if the unit is not held or maintained
properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with