La Crosse Technology V51 Setup Manual page 6

RAIN
Positioning the Rain Sensor
For Accurate Measurements
• Mount the Rain Sensor horizontally and ensure it's level.
• The sensor should be mounted more than 3 feet (91.4 cm)
above ground.
• Your Rain Sensor needs to be in an open area for
accurate readings.
• Ensure the base of your Rain Sensor is not in a depression.
• This sensor has drainage holes in its base that allow it to
self empty.
• View sensor mounting video at:
Viewing Your 24 Hour Rain Data
• Your rain data will show in the Extra Sensor area.
Its values will reset to zero after 24 consecutive
hours of no additional rainfall.
• Press the EXTRA button to cycle through the
Pressure, Rain, or Extra Sensor data displayed
on the LCD.
• The Auto Scroll Icon ( ) indicates the display
will automatically switch between extra sensor
readings.
Please Note: Rainfall data can only be erased
with a factory restart or by manually deleting the
rain sensor from the display. For this reason, we
recommend waiting for 24 hours of no rainfall for
the unit to reset to zero on its own.
bit.ly/Rain_SensorMounting
Rain Data Example Pressure Example
RAIN
Rain Sensor Cleaning & Storage
Cleaning Your Rain Sensor
• Leaves, grass, or other debris may need
to be removed periodically from the funnel
of your Rain Sensor.
• Be sure to check inside your Rain Sensor
as well. Insects or dirt can begin to restrict
the movement of the Rocker.
• Unlatch the Locking Tabs on the side
of the Rain Sensor to remove the Funnel.
This will allow you to easily clean each part
separately.
Winter Storage Options
• Remove batteries and store in a safe place.
• Remove batteries and cover in place.
• Leave outside, uncovered. While the Rain
Sensor cannot accurately record snowfall,
when the snow melts the water will be
counted as rain.
• The Rain Sensor is self-emptying, so water
should not freeze inside.
• This Rain Sensor is designed for outdoor
use and will withstand temperatures below
freezing.
09
Funnel
Battery
Compartment
Rocker
Locking Tabs
10