Connecting Neo2 To Your Computer - Alphasmart NEO 2 Quick Manual

C N E O 2
O N N E C T I N G
Connecting a Single NEO 2 to Your Computer
C
ONNECTING
C o n n e c t i n g a S i n g l e N E O 2 t o Y o u r C o m p u t e r
On Windows XP
computers, you may
be notified that the
driver is not certified for
Windows XP. The driver will
work for your system; to go on,
click Continue Anyway.
6
Y C
T O O U R O M P U T E R
9. The program will ask if you want to search for configuration files from
previous versions of AlphaSmart Manager.
• If this is the first time you've installed the program, click No.
• If you have a previous version and you want to save your
configuration, click Yes. If the program can't find the files, you may
need to browse for them yourself.
10. The installer will also ask if you want to add the program to the dock. Click
Yes or No. The installation will be completed. Your computer may be
restarted.
NEO 2 Y
TO
1. If this is the first time you have connected the NEO 2 to your computer,
make sure you are logged in to your computer as an administrator or that
you have permissions that allow the device drivers to load properly. Also,
make sure AlphaSmart Manager is not running.
2. Using the cable that came with the NEO 2, connect the USB connector
to your computer, and connect the square end
3. The first time you connect your NEO 2 to a Windows computer, the
computer may notify you that it has found the hardware and installed the
driver. If a hardware wizard appears, follow the instructions in the wizard.
The first time you connect your NEO 2 to an OS 10 computer, a keyboard
setup assistant will open. Follow the instructions in the assistant.
C
OUR OMPUTER
A
B
C
A
B to your NEO 2 at C .
NEO 2 and SmartApplets
Quick Guide