Installing The Batteries - Alphasmart NEO 2 Quick Manual

I
NSTALLING THE
If you purchased the
rechargeable battery
pack, insert it instead
of the batteries and connect
the cable on the battery pack
to the matching cable next to
the NEO 2 battery
compartment. Then, connect
the AC adapter to your NEO 2
and plug it into an outlet as
soon as possible after
receiving the NEO 2. Charge
the unit for at least 16 hours
the first time; charge it 4–8
hours subsequent times. For
more information, see the
NEO 1 and NEO 2 User
Manual on your NEO 1 and
NEO 2 Documentation CD.
NEO 2 and SmartApplets
Quick Guide
B
ATTERIES
Follow these steps to install the AA batteries:
1. On the back of the NEO 2, put your thumbs in the circles
compartment cover toward the left to remove it from the NEO 2.
Note: After you install the batteries the first time, you may use a small
Phillips screw to secure the cover. If you do this, you will need to remove
the screw to open the cover the next time you install batteries.
2. The first time you open the compartment, you'll find a small plastic bag
with a Phillips screw to help keep the battery compartment shut. Remove
the bag.
3. Insert the three AA batteries into the compartment. Make sure the + end
of each battery points toward the black and red cables.
4. Put the battery compartment cover back on and slide it back in place. You
can insert the small Phillips screw in the hole in the cover to make sure
the cover stays shut.
I
N S T A L L I N G T H E
A A
B
A T T E R I E S
A and slide the
3