ADURO -tronic Quick Start Quide page 15

How to operate Aduro-tronic
When lighting:
Set the Aduro-tronic control to manual to ensure the maximum amount of primary air is allowed in when
lighting. We also recommend leaving the door ajar for the first 5-10 minutes.
To set the Aduro-tronic control to manual:
1. push the primary damper back as far as it will go
2. push the Aduro-tronic control lever back, and to the right
Open the primary damper fully by pulling it forwards.
When the stove is hot and there is a bed of embers, the Aduro-tronic can be set to automatic.
To set the Aduro-tronic control to automatic:
1. push the primary damper back as far as it will go
2. push the Aduro-tronic control lever to the left until the spring pulls the lever into its locked
position.
15