Panasonic HL-C2 Series User Manual page 19

Settings for Ethernet Communication Environment
You can set the measurement information to be automatic acquisition
and communication settings to match the (PLC) control devices to be
connected.
1
Select the HL-C2 in which the setting changes are to be made.
2
Select [Communication Setting] in the [Edit] menu or click the right
mouse button and select [Communication Setting].
3
Make necessary communication settings according to the connecting
device.
Click the [OK] button after change of setting.
Connecting device
MEWTOCOL-supporting
PLC
iQSS-supporting PLC
MC protocol-supporting
PLC
Chapter 2 Communication Tool Software Configurator WD
Protocol Mode
Action Communication
mode mode
Normal MEWTOCOL
iQSS MC protocol (fixed)
Normal MC protocol
2-7
2
Others
See 2-1.
Setting
Items