Panasonic HL-C2 Series User Manual page 15

Item
Destination IP
Address
Destination Port
No.
Source Port No.
Output
Measurement
Value Output
Setting
OUT Meas.
Value Precision
Output Register
Output
(*1)
Continuous
Output Startup
*1: The actual minimum interval varies with the connecting device and
content of output. Communication is processed at best effort if the
set value is less than the minimum possible actual time.
Chapter 2 Communication Tool Software Configurator WD
Content
Set the IP address of the
communicating device
Set an IP address other than
0.*.*.*, 255.*.*.*, *.*.*.0 and
*.*.*.255.
Set the destination port
number of the
communicating device.
Setting range: 1024-65535
Set the source port number
of the communicating device
Setting range: 0,1024-65535
Set the information to be
acquired.
Refer to the content of output
under "Allocations of Output
Destination Register."
Set [Single] or [Double].
 [Single]: 32-bit IEEE
single-precision type
 [Double]: 64-bit IEEE
double-precision type
Set the top
allocate output data.
Setting range: 0-9000
Set the output
Interval interval in
milliseconds.
Setting range: 1-15000
Set the automatic output
refresh.
Select "on" or "off." (The
setting is fixed to "on" if the
iQSS mode is selected.)
2-3
Default value
192.168.1.10
9094
9095
1:Head A
Received Light
Intensity
Double
register to
100
refresh
units of
1000
on
2