SMART OPS PC User Manual page 3

User guide
SMART OPS PC modules
Welcome
SMART Open Pluggable Specification (OPS) PC
modules provide a hassle-free Windows 10 Pro
solution based on the latest eighth generation
Intel® Core™ processors, and are designed specifically
to work with SMART Board® interactive displays.
Available in two standard configurations, all OPS PC
modules in the PCM8 series are WHQL (Windows
Hardware Quality Labs) certified and fully licensed
with Windows 10 Pro out of the box. Install the OPS PC
module in a SMART Board interactive display's OPS
slot to provide a complete 4K UHD Windows 10
solution at your fingertips, without the need for an
external device or additional cables.
Install familiar Windows software applications such as
SMART Notebook® collaborative learning software,
SMART TeamWorks™ visual collaboration software, and SMART Meeting Pro® software, and access the
internet directly through your existing interactive display's network connection. Upgrades and service for
the OPS PC module can be easily performed without removing the interactive display from its mounting.
Installing and using the SMART OPS PC module
You or your organization's installers can install the SMART OPS PC module in a supported SMART Board
interactive display's accessory slot following the OPS PC module's installation instructions
(smarttech.com/kb/171544). You can then view the OPS PC module's input on the display.
CAUTION
Do not install the OPS PC module or remove it from the accessory slot while the display is turned on.
Ensure the power switch on the back of the display beside the AC power inlet is in the OFF (O) position.
NOTE
For a list of SMART Board interactive displays in which you can install the OPS PC module, see the
SMART OPC PC modules (PCM8 series) specifications (smarttech.com/kb/171429).
smarttech.com/kb/171747 3