Ordering Information; Environmental Specifications; Redundant Power Supply - Allied Telesis AT-9408LC/SP Datasheet

AT -9400 Series
Miscellaneous Specifications
Power Characteristics
Voltage 100-240vAC
Current 4.0/2.0A
Frequency 50-60Hz
Maximum Power consumption:
AT-9408LC/SP 58 Watts
AT-9424T/GB 54 Watts
AT-9424T/SP 54 Watts
AT-9448Ts/XP 143 Watts

Environmental Specifications

Operating Temp. 0°C to 40°C
(32°F to 104°F)
Storage Temp. -25°C to 70°C
(-13°F to 158°F)
Operating Humidity 5% to 90% non-condensing
Storage Humidity 5% to 95% non-condensing
Maximum Operating Altitude
3,048m (10,000ft)
Electrical/Mechanical Approvals
Safety UL 60950-1, CSA C22.2 No. 60950-1-03,
EN60950, EN60825 (TUV)
EMI FCC Class A, EN55022 Class A, VCCI Class A,
C-TICK, EN61000-3-2, EN61000-3-3
Immunity EN55024
Country of Origin
China
USA Headquarters | 19800 North Creek Parkway
European Headquarters | Via Motta 24
Asia-Pacific Headquarters | 11 Tai Seng Link
www.alliedtelesis.com
© 2005 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
| Managed Gigabit Ethernet Switches with Enhanced Security

Ordering Information

AT-9424T/GB-xx**
Layer 2+ Switch with 24 ports of 10/100/
1000Base-T plus 2 combo GBIC slots (unpopulated)
AT-9424T/SP-xx
Layer 2+ Switch with 24 ports of 10/100/
1000Base-T plus 2 combo SFP slots (unpopulated)
AT-9408LC/SP-xx
Layer 2+ Switch with 8 ports 1000Base-SX
plus 4 SFP slots (active)
AT-9448Ts/XP-xx
Layer 2+ stackable switch with 48-port
10/100/1000Base-T plus 2 XFPs (unpopulated)
+ memory flash card slot
Where xx
Accessories
Stacking accessories
AT-StackXG-00
AT-StackXG/0.5-00
AT-StackXG/1-00

Redundant Power Supply

AT-RPS3204
AT-PWR3202
| Suite 200 | Bothell
| 6830 Chiasso | Switzerland
| Singapore | 534182
= 10 for U.S. power cord
= 20 for no power cord
= 30 for U.K. power cord
= 40 for Australia power cord
= 50 for Europe power cord
Stacking module for the
AT-9448Ts/XP switch.
One AT-StackXG/0.5-00 cable
included.
0.5 meter cable for stacking
1 meter cable for stacking
Chassis for up to 4 redundant
power supplies
(Chassis includes one power
supply and one cable)
Additional 200w redundant
power supply with cable
| WA 98011 | USA | T: +1 800 424 4284
| T: +41 91 69769.00 | F: +41 91 69769.11
| T: +65 6383 3832 | F: +65 6383 3830
GBICs
1000T GBIC Copper
AT-G9T
550m SX GBIC, based on
AT-G8SX-01
50 Micron fiber 220m SX GBIC,
based on 62.5 Micron fiber
10km LX GBIC, based on
AT-G8LX10
9 Micron fiber
25km LX GBIC, based on
AT-G8LX25
9 Micron fiber
40km LX GBIC, based on
AT-G8LX40
9 Micron fiber
70km LX GBIC, based on
AT-G8LX70
9 Micron fiber
Small Form Pluggables (SFPs)
Multi-mode Fiber, GbE Small
AT-SPSX
Form-factor Pluggable (SFP)
850nm
Single-mode Fiber, 10km,
AT-SPLX10
GbE SFP, 1310nm
Single-mode Fiber, 40km,
AT-SPLX40
GbE SFP, 1310nm
Single-mode Fiber, 40km,
AT-SPLX40/1550
GbE SFP, 1550nm
Single-mode Fiber, 80km,
AT-SPZX80
GbE SFP, 1550nm
Single-mode Fiber, CWDM, 80km
AT-SPZX80
/xxxx
GbE SFP
xxxx = CWDM Wavelengths:
1470, 1490, 1510, 1530, 1550,
1570, 1590, 1610
10Gbps Small Form Pluggables
(XFPs)
Multi-mode Fiber, 850 nm
AT-XPSR
Single-mode Fiber, 10km,
AT-XPLR
1310nm
Single-Mode Fiber, 40km,
AT-XPER40
1550nm
| F: +1 425 481 3895
617-00601-00 Rev. K