Advertisement
Note:
1) When user left-clicks
fixed. In this case the
Camera Control Panel
side of the video window. Only when users left click the
measurement mode will they be able to doing other operations in the
or the
Panel
Synthesis Camera Control Toolbar
2) When a specific measuring object is selected during the measuring process, the
Control Bar
3) To ensure accuracy of the measurement, please click the
camera sensor to the standard
calibration is completed and the video is focused.
4) In case calibration is completed but camera sensor is not on the C-mount position, The
should be done to reset sensor to the standard
started.
XFCAM1080PHB/PHD Auto Focus HDMI C-mount CMOS Camera
Polygon
Curve
Make Calibration to determine the corresponding relation between magnification and
resolution, this will establish the corresponding relationship between measurement unit and
the sensor pixel size. Calibration needs to be done with the help of a micrometer. For detailed
steps of carrying out calibration please refer to ToupView help manual.
: Click
Conjugate Correction
calibration. Then manually adjust the coarse and fine focus knob of microscope to make
sure the video is clear. Make sure the magnification in the software stays in accordance
with microscope magnification, and then select the corresponding
doing the measurement.
Export the measurement information to
Delete All the Measurement Objects
Setting
Exit from Current Measurement Mode
When the measurement ends, left-click on a single measuring object and the
Location & Properties Control Bar
,
,
Left
Move Right
Move Up
button
Display/Hide
will not pop up automatically even if moving mouse cursor to the left
.
will appear for changing the object location and properties of the selected objects.
position before calibration. The measurements can be started after
C-mount
C-mount
to do the
file (
CSV
will show up. The icons on the control bar mean
,
,
Move Down
Color Adjustment
on the
Measurement Toolbar
button on the
Camera Control Panel
Conjugate Correction
position and the video is focused before measurement is
9 / 10
before doing any
Conjugate Correction
Measurement Unit
)
*.csv
and
.
Delete
, the
Measurement Toolbar
Measurement Toolbar
, the
Auto Focus Control
Object Location & Attributes
button
Conjugate Correction
for
Object
Move
will be
to exit from the
to reset the
Advertisement
