Advertisement
2
Quick Instructions for XFCAM1080PHB/PHD camera
Before starting the camera please connect the standard
adapter and connect it to the microscope's 3
camera sensor.
2.1
WiFi Mode
1.
Plug
power cable into
12V/ 1A
turn into red;
2.
Press
ON/ OFF Button
3.
Plug the
antenna which comes with the camera into
WiFi
4.
After the indicator on the
signal whose name starts with
5.
Open
software, start
ImageView
For more details please refer to the
2.2
HDMI MODE
1.
Plug the HDMI cable into the
2.
Plug a USB mouse into
3.
Plug 12V/ 1A power adapter into
will turn into red;
4.
Insert SD card into
5.
Press
ON/ OFF Button
6.
Move mouse cursor to the left side of the video window, The
Manual/ Automatic Exposure
details;
7.
Move the mouse cursor to the upper side of the video window, a
other measurement tools will appear, please refer to 2.3 for details; The measurement data can be output with
format.
*.CSV
8.
Move the mouse cursor to the bottom of the video window and a
Operations like
Zoom In
details;
9.
Move the mouse cursor to bottom of the video window, the
automatically. Click the
operation;
XFCAM1080PHB/PHD Auto Focus HDMI C-mount CMOS Camera
rd
Power Interface
⑤ to start the camera and the
antenna starting blinking, connect computer (may be Pad or Phone) to
WiFi
XFCAM1080PHB/PHD
XFCAM1080PHB/PHD
ImageView
① to connect the
HDMI Port
② to get control of the camera by using built-in software
USB Port
Power Interface
④ for saving captured images and recorded videos;
SD Card Slot
⑤ to start the camera.
,
White Balance
,
,
,
Zoom Out
Flip
Freeze
button and
XFCAM1080PHB/PHD
tube which will relay microscope object's middle image to the
③ to supply power for the camera. The
LED Indicator
WiFi ANTENNA/ USB PORT
. The
Password
by clicking the camera model name listed in
help manual;
XFCAM1080PHD
③ to supply power for the camera. The
⑥ will turn into blue;
LED Indicator
Camera Control Panel
,
,
and other functions, please refer to 2.3 for
Sharpness
Denoise
Synthesis Camera Control Toolbar
,
,
and etc. can be realized. Please refer to 2.3 for
Cross Line
WDR
Synthesis Camera Control Toolbar
Auto Focus Control Panel
2 / 10
C-mount camera to camera
LED Indicator
⑥ will turn into blue;
② to generate
is 12345678;
camera to HDMI display;
will appear. It includes
Measurement Toolbar
will show up for conducting autofocus
⑥ will
signal;
WiFi
WiFi
.
Camera List
;
XCamView
⑥
LED Indicator
with calibration and
will appear.
will pop up
Advertisement
