Advertisement
2.3.1
The Camera Control Panel on the Left Side of the Video Window
Camera Control Panel
The
Camera Control Panel
applications; It will pop up automatically when the mouse cursor is moved to the left side of the video window (in
measurement status, the
the
Camera Control Panel
button to achieve
Display/ Auto Hide
XFCAM1080PHB/PHD Auto Focus HDMI C-mount CMOS Camera
Function
Capture or
Snap
Record video from the current video window
Record
When
adjusts exposure time according to the value of
Auto Exposure
value
Available when
Exposure
Exposure Compensation
Compensation
achieve proper brightness value
Available when
Exposure Time
decrease or increase exposure time to adjust the video brightness
Adjust
Gain
be reduced or increased accordingly
Slide to left or right to decrease or increase the proportion of
Red
video window
Green
Green
Slide to left or right to decrease or increase the proportion of
Blue
the video
Auto
White Balance
Adjust
Sharpeness
Adjust
Denoise
Adjust
Saturation
Adjust
Gamma
gamma and to the left to decrease gamma
Adjust
Contrast
contrast and to the left to decrease contrast
For
DC
DC
need for compensating light flickering
Check
AC(50HZ)
illumination
Check
AC(60HZ)
illumination
Set all the settings in the
Default
controls the camera to achieve the best image quality according to the specific
will not pop up. Only when measurement process is terminated will
Camera Control Panel
pop up by moving mouse cursor to the left side of the video window). Left-clicking
switch of the
Function Description
image from the current video window
Snap
Automatic Exposure
Auto Exposure
according to current video brightness to
Auto Exposure
to decrease or increase the video brightness. The noise will
Gain
is a base for reference and cannot be adjusted
adjustment according to the window video
White Balance
level of the video window
Sharpness
level of the video window
Denoise
level of the video window
Saturation
level of the video. Slide to the right side to increase
Gamma
level of the video. Slide to the right side to increase
Contrast
illumination, there will be no fluctuation in light source so no
to eliminate flickering "strap" caused by 50Hz
AC(50HZ)
to eliminate flickering "strap" caused by 60Hz
AC(60HZ)
Camera Control Panel
;
Camera Control Panel
4 / 10
is checked, the system will automatically
Exposure Compensation
is checked. Slide to left or right to adjust
is unchecked. Slide to left or right to
to the default values
in
Red
for
Blue
Advertisement
