Introduction - Jonsered 6000+ Operator's Manual

Introduction

This instruction manual describes in detail how to
use and service the one-man sawmill and how
periodic checks are to be carried out. It also de-
scribes what measures should be taken to
ensure maximum safety, how the safety devices
are de-signed, how they function, how to check
and examine them, and carry out repairs, if
required.
CAUTION! The section concerning safety
must be read and understood by everyone
who installs, uses and repairs the sawmill.
The instruction manual covers the installation,
the general use and the various maintenance
meas-ures to be carried out by the user. If more
thorough service or fault tracing is required, this
must be carried out by qualified service
personnel. For particulars, get in touch with your
local dealer.
The instruction manual contains a description of
all the necessary safety devices. This description
must be read and understood by the user before
assembling the sawmill. In other words, the first
measure to be taken after the unit is delivered, is
to find and read the instruction manual.
INTRODUCTION
The symbols and warning markings on the one-
man sawmill are illustrated on the next page of
this instruction manual. If any warning decal has
become disfigured or worn, a new one must be
ordered at once and fitted to the unit as soon as
possible. This will ensure best possible safety
when using the one-man sawmill.
The one-man sawmill should only be used for
sawing boards and planks from logs.
3
English