Jonsered 6000+ Operator's Manual page 14

Safety devices
The one-man sawmill is equipped with a number
of safety devices, which are described under the
coming headings.
!
WARNING!
The one-man sawmill must not
be started up if any safety
device has been removed, is
defective or is out of function.
Saw blade wheel guard (25)
The saw blade wheels are fitted with a guard (a
plastic cowl), one fitted at each wheel. Each
plastic cowl is secured by 3 rubber staps which
facilitate removal and refitting whenever the saw
blade has to be replaced.
Saw blade guard (upper) (A)
The upper section of the saw blade runs in a slot.
The slot is permanently secured to the saw unit.
Saw blade guard (lower) (27)
The section of the saw blade that is not covered
by the log during the sawing operation is
equipped with a guard, which is mounted on the
saw blade guide and is moveable on it.
Brake (B)
To enable the saw blade to quickly come to a
stop when the brake handle and the throttle are
released, the unit has an automatic brake which
influences the left-hand saw blade wheel.
Muffler (9)
The saw is equipped with an exhaust pipe and a
muffler which reduce noise emitted from the
motor and discharge exhaust gases away from
the oper-ator.
Exhaust pipe guard (30)
The exhaust pipe is equipped with a guard which
prevents the operator from coming in contact
with its hot surface.
14
English
DESCRIPTION
B
A
25
27
30 9