Front Panel Block - Sony HT-S500RF Service Manual

HT-S500RF/S700RF
2-9.

FRONT PANEL BLOCK

1 Insert a flat-head screwdriver into
the two slits on the bottom of the unit,
and open a gap between the front
panel block and speaker cabinet.
speaker cabinet
slit
bottom side
top side
7 Insert the jig into the space and slowly
remove the front panel block.
Note 1: When using a jig, please work
carefully so as not to damage
the front panel block and
speaker cabinet.
total four bosses
bottom side
15
3 While moving the jig in the direction
slit
front side
Facing the side up.
front panel block
soft cloth, etc.
8 While moving the jig in the
direction of the arrow,
remove five bosses.
9
qa
0
front side
top side
of the arrow, remove five bosses.
4
6
5
front side
top side
Direction of the opposite
side upwards.
total nine bosses
Note 3: When installing the front
panel block, remove the
used bond and use a new
bond to fix the front panel
block.
Sony CONFIDENTIAL
For Authorized Servicer
2 Insert the jig into the space and slowly
remove the front panel block.
Note 1: When using a jig, please work
carefully so as not to damage
the front panel block and
speaker cabinet.
total five bosses
bottom side
qg front panel block
Note 2: When installing the front
panel block, align the nine
bosses and nine holes.
qd cable (FL~MAIN)
(4 pin) connector
qs
terminal side
qf FFC (FL~MAIN)
(14 core)
total nine holes
Note 3: When installing the front panel block,
remove the used bond and use a new
bond to fix the front panel block.
SYS SET