Front Panel Block - Sony HT-XT100 Service Manual

HT-XT100

2-10. FRONT PANEL BLOCK

How to install the connector
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
OK
Insert straight into
the interior.
connector
connector
NG
Insert only part way. Insert at a slant.
connector
connector
connector
How to install the flexible flat cable
When installing the flexible flat cable,
ensure that the colored line is parallel
to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
NG
Insert at a slant.
flexible flat
cable
colored line
connector
7 Remove the front panel block
in the direction of the arrow.
6 twelve screws
(3.5 15 B)
12
NG
connector
terminal side
2 connector
(XP6)
1 connector
(XP5)
– Front bottom view –
8 Draw the wire out of
the hole in cabinet.
9 front panel block
3 FFC 16P/MAIN-FRONT (FFC2)
(XP15)
4 connector
(XP4)
5 Remove the wire
from the hook.
hook
MAIN board
hook
POWER board
8 Draw the wire out of
the hole in cabinet.