Advertisement
Use voice dial function by pressing Volume+ button for 2 seconds,
while device is in standby mode.
Transfer a call
Pressing Volume+ or Volume- button for 2 seconds will switch the
link to the mobile phone. Pressing Volume+ or Volume- button for 2
seconds again switches the link back to the stereo mode.
Answering incoming call during listening stereo music
When there is an incoming call while eMic-BT is in stereo mode,
eMic-BT will automatically mute the sound in stereo mode and send
out the ring tone. You are able to answer the phone by just pressing
the Main function button. Emic-BT will automatically switch to stereo
mode after ending up the call.
Note: To be able to perform last number redial, voice dial and
transfer call functions the mobile phone must support Handsfree
profile.
eMic mode functions
eMic mode is provided by eMic Monitor software. It works when eMic-
BT is connected to a computer in Headset mode and eMic Monitor
software is running. There are many useful one-button-click functions
in eMic mode: recording an voice message and attaching recorded
GEMBIRD EUROPE B.V.
eMic-BT
eMic-BT
Bluetooth headset
Bluetooth headset
http://www.gembird.eu
USER MANUAL
15
Advertisement
