Load The Paper - Canon Selphy Square QX10 Getting Started

Preparing the printer and printing
This section describes how to turn on the power, load the paper, load the
ink cassette, register the printer (QR code), print, and turn off the power.
1
Turn on the power.
 
Hold down the Power button until the
STATUS lamp begins to blink white, then
wait until the STATUS lamp lights up.
2

Load the paper.

 
Press the Open button to release the
lock, and open the paper compartment
cover.
 
Set the paper (up to 10 sheets) with the
printing surface (the surface without the
Canon logo) facing downward, being
careful not to touch the printing surface.
 
Align the edge of the paper with the
circled parts. Do not push the paper to
the back of the compartment.
 
Close the paper compartment cover.
7