Advertisement
CONNECTING VEHICLE POWER TO S410 DOCKING STATION
WITH EXTERNAL POWER SUPPLY
(Only use .500" hex bolts that come with the
dock. A longer bolt will not work and might
damage electronics)
Connect power wire to 12Vdc Vehicle power
Attach Power Supply with mounting bracket
(sold separately)using #10-32 screws provided
with the bracket
Motion Attachment attached with
(4) .25-20 hex head bolts & washers
included in hardware bag
Insert power plug into power port, secure cable with cable ties
Attach Screen Support (7110-1206) here or on opposite side
UNIVERSAL ADAPTER
(if using, attach this before attaching the
power supply)
Replace washer head bolts with hex
head bolts supplied in hardware bag
Attach Universal Adapter to dock with
side flange toward power supply as shown
Attach Universal Adapter to dock with
(4) .25-20 hex head bolts & washers
(included in the Dock Hardware bag)
4 / 7
Advertisement
