Maximum 15 Degrees Up And Down Bend - Summers Leg Master Slim Instructional Manual

STEP 1
Remove from box all components and
lay them out.
Release Knob on front of Central Base
Support.
Insert Handlebar Base Pole and tighten.
Handlebar
Spring Knob on
Front of Central
Base Support

Maximum 15 degrees up and down bend

The correct use of the flexible handlebar
involves light pressure with the fingertips.
The flexible handlebar is designed to be bent
at a maximum angle of 15°, both on the
upward lift and the downward flex.
SUMMERS LEG MASTER SLIM
STEP 2
Insert Flexible Handlebar into
Base Pole.
Tighten all Knobs before use.
Handlebar
Spring Knob
.
You will be amazed at how effective it is even seated.
If necessary start seated to get you going if over 350lbs.
TM
is a registered trademark of Neil Summers/Enanef Ltd.
STEP 3
Unit should look as opposite.
Unscrew the Handle Bar Spring Knob.
Adjust the height of the handle bar to allow
you to rest your hands on to keep your
balance.
Please note only adjust height of handle bar
whilst standing on the ground.
Never attempt to adjust height of handle
bars whilst standing on the Summers
Leg Master Slim.
Handlebar
Spring Knob