MRC Sheer Brilliance 0001637 Quick Start Manual

PROGRAMMING FOR DCC OPERATION – DIGITAL MODE
This decoder supports all program methods including register, paged mode,
direct CV programming, and programming on the main (OPS mode)
CV Register Description
CV1 R1 Short addres s
CV2 R2 Start voltage
CV3 R3 Acceleration
CV4 R4 Deceleration
CV5 --- Top voltage
--- R6 Page num ber
CV29 R5 Bas ic configuration
CV7 R7 Manufacturer vers ion num ber
CV8 R8 Manufacturer ID
CV17 --- Long addres s upper byte
CV18 --- Long addres s lower byte
CV19 --- Advanced cons is t addres s
When CV21=0, all accessory function will
CV21 ---
follow its own address. When CV21=1, all
functions will follow the consist address
CV49
Sound on/off (1=on)
CV50 --- Whis tle type
CV51 --- Whis tle volum e
CV52 --- Bell type
CV53 --- Bell volum e
CV54 --- Bell ring rate
Chuff type(0-5=single chuff, 8-12=double
CV55 ---
chuff)
CV56 --- Chuff volum e
CV57 --- Brake s queal volum e
CV58 --- Air releas e volum e
CV59 --- Blower his s volum e
CV60 --- Random nois e volum e
CV61 --- Injector volum e
CV62 --- Coupling volum e
CV63 --- Air pum p type
CV64 --- Air pum p volum e
CV105 --- Us er identification num ber
CV106 --- Us er identification num ber
CV112 --- Conductor volum e
CV115 --- Auto brake s queal enable/dis able
CV116 coupling s ound type
CV118 --- Shoveling volum e
CV119 --- Coupling fire volum e
CV120 --- Chuff rate
CV121 --- Chuff s tart point
Speed curve select(0=linear, 1=slow increase
CV124
at slow speed, 2=fast increase at slow speed)
Factory default setting, program it to1 will
CV125 ---
restore all the CV to def ault settng
CV #124 =2
Range Default
1-127 3
0-32 0
0-32 0
0-32 0
0-32 32
--- ---
Speed curve of different value of CV #124
--- 2
--- 32
--- 143
192-231 192 TROUBLE SHOOTING
0-255 3
This sound decoder should perform well with all DCC systems. See your DCC
system manual to learn how to program and operate the decoder. For more
0-127 0
information about register/CVs and their functions, please refer to the NMRA DCC
Standard & Recommended practices, RP-9.2.2 this is available directly from the
0-1 0
NMRA or their website at www.nmra.org.
Due to the nature of all sound decoders, the CV read back may not work.
0-1 1
Whenever the decoder doesn't work it may lose its address. Please use program
0-11 3
track to re-program the loco address or program CV# 125 with value 1 to restore
0-3 3
the decoder to factory setting. This should bring the decoder to life.
0-3 3
0-3 3
FCC COMPLIANCE
0-50 3
This device complies with the part 15 of FCC rule. Operation is subject to the
following two conditions. (1) This device may not cause harmful interference, and
0-12 0
(2) This device must accept any interference received, including interference that
cause undesired operation.
0-3 3
0-3 3
RETURN PROCEDURE
0-3 3
If it should become necessary to return your decoder, unplug the decoder and
0-3 3
return the decoder only. Please include a letter (printed clearly) with your name,
0-3 3 address, a daytime telephone number, and a detailed description of the problem
you are experiencing. Please also include a $15.00 check for shipping and
0-3 3
handling. Be certain to return only the decoder.
0-3 3
Send the decoder to:
0-3 0
Model Rectifier Corporation
0-3 3
Attn: Parts & Service
0-255 0
80 Newfield Avenue
0-255 0
Edison, NJ 08837-3817 U.S.A
0-3 3
0-1 1(enable)
0,2,3 3
0-3 3
0-3 3
0-30 ---
0-5 ---
0-2 0
--- 0
CV #124 = 0, Linear
CV #124 =1
    
2005 MODEL RECTIFIER CORPORATION
80 NEWFIELD AVENUE
EDISON, NJ 08837-3817 Printed in USA
Sheer Brilliance N Gauge
Steam Sound Decoder with
19 Accessory Sound Functions
Item #0001637
Thank you for purchasing our highly advanced DCC locomo-
tive sound decoder. Combined with any DCC System, our
new decoder with authentic steam sound truly will make your
model railroad come to life.
• Synchronized steam chuff with random sounds
•
12 selectable chuff sounds (4 regular/ 4 articulated)
•
User selectable 12 different whistles and 4 bells
•
19 accessory functions allowing more sound control
than ever
• Programmable individual sound volumes
• 1.0 amp capacity
• Programmable for either 2-digit (1-127) or 4-digit
(1-9999) addresses
• Programmable start voltage
• Programmable acceleration rate
• Programmable deceleration rate
• Programmable top voltage
• Programmable 14, 28, 128 speed steps
• Selectable factory default speed curve
• Directional lighting control for front and rear lights at
0.2 amp rate.
• Programmable chuff rate and chuff starting point
• Supports advanced consisting (CV19)
• Supports programming on the main, (Ops mode)
• Compatible with NMRA DCC standard
• Complies with the part 15 of FCC
• 17mm speaker included
• Dimensions: 30.0mm x 10.0mm x 5.0mm