Parameters - Pressure Tech Swiss PT-1000 Operation Manual

NUMBER NAME
101 PUMP ON DELAY
102 VALVE CLOSE DELAY
103 HIGH PRESSURE MAX
104 CONTINUOUS RUN
TURN OFF TIMER
105 PRESSURE UNITS
106 OIL COOLER OPTION
107 FAN OFF DELAY
108 EMPTY
Operation Manual for PT-1000 & PT-2000

PARAMETERS

DESCRIPTION
THE VALUE ENTERED (SECONDS) IS THE
TIME THAT THE PUMP WILL DELAY TURNING
ON AFTER THE VALVE IS TURNED ON.
THE VALUE ENTERED (SECONDS) IS THE
TIME THAT THE VALVES WILL DELAY CLOS-
ING AFTER THE PUMP IS TURNED OFF.
THE VALUE ENTERED (PSI) IS THE PRES-
SURE THAT WILL TRIP AN ALARM IF THE
PUMP OUTLET EXCEEDS THAT VALUE.
THE VALUE ENTERED (SECONDS) IS THE
AMOUNT OF TIME THAT THE UNIT WILL BE
ALLOWED TO CONTINUOUSLY RUN BEFORE
TIMING OUT AND TRIGGERING AN ALARM.
CHANGE THE UNITS THAT THE PRESSURES
WILL DISPLAY ON THE HMI.
ENABLE THE FUNCTIONALITY/ALARMING
OF THE OIL COOLING UNIT
THE VALUE ENTERED (SECONDS) IS THE
TIME THAT THE COOLING FAN WILL RUN
AFTER THE PUMP IS TURNED OFF
RESERVED FOR FUTURE USE
DEFAULT RANGE
0.5 0.0 - 10.0
2.0 0.0 - 10.0
2500 0 - 9999
1800 0 - 9999
0: PSI 1: BAR
0: NOT 1: INSTALLED
INSTALLED
120 0.0 - 30
N/A N/A
Page 11