Alesis S4 Plus Reference Manual page 95

Chapter 7: Editing Effects
Configuration #4: 2-Sends, with EQ
AUX LEFT
AUX RIGHT
MAIN LEFT
MAIN RIGHT
FX SEND 1
FX SEND 2
Pitch 1
Mono chorus
Stereo chorus
Mono flange
Stereo flange
Pitch detune
Resonator
Pitch 2
Mono chorus
Stereo chorus
Mono flange
Stereo flange
Pitch detune
Resonator
In this Configuration, note that Sends 1 and 2 are identical to that of Configuration #1.
However, Sends 3 and 4 have been removed. In their place, we have added a
shelving EQ module to the main outputs. This means you have bass and treble boost
controls for all sounds coming out of the main outputs (not just the sounds routed to
the Effects Sends).
If you are using Configuration #4, routing any of the Program's Sounds to Send #s 3
J
or 4 will have no effect. In other words, it's as if you routed channels of your mixing
console to effects sends that aren't connected to anything.
The MISC function is where you access the EQ parameters used in this
configuration. This can be selected in the same manner as any other function using
the FUNCTION [¨] and [Æ] buttons. The shelving EQ provides bass and treble boost,
and affects the entire main output.
94
1 2
BAL.
PITCH 1
PITCH 1 DELAY 1
BAL.
PITCH 2
PITCH 2 DELAY 2
Delay 1
Mono delay
Stereo delay
Ping-Pong delay
Delay 2
Mono delay
Stereo delay
Ping-Pong delay
1 2
MIX
DELAY 1 BAL.
1
AMP
2
REVERB 1
DELAY 2 BAL.
1
AMP
2
REVERB 2
Reverb 1
Plate 1
Plate 2
Room
Hall
Large
Gate
Reverse
Reverb 2
Balance and level
to Reverb 1
AUX LEFT
AUX RIGHT
MAIN LEFT
EQ
MAIN RIGHT
MISC
1
REVERB 1
Misc. 1
EQ
S4 Plus Reference Manual