Alesis QS6 Reference Manual page 39

Chapter 4: Overview
To audition Programs before overwriting them with STORE
...when editing a Program in Mix Play Mode:
¿
While in Mix Program Edit mode, press [PROGRAM].
This selects Program Play Mode, retaining your edits to the Program in Mix Edit.
¡
Use the [
is inserted, use the [
¬
Use the [s VALUE] and [VALUE t] buttons or move the [CONTROLLER A] slider to
scroll through the Programs until you find one you wish to overwrite with the new
edited Program. Take note of the number.
÷
Press [MIX].
This recalls the edit buffer in Mix Mode, which contains your edited Program.
ƒ
Press [EDIT SELECT] twice, until "EDITING: PROGRAM" appears under the
MIX number in the display.
ª
Press [STORE].
The top line of the display will read "
a User Program number from 000—127.
D
Optional: If the location you noted was on a RAM card, use [BANK
the Card Bank.
«
Press [PAGE
display.
»
Use the [s VALUE] and [VALUE t] buttons or move the [CONTROLLER A] slider
to select the Program Number you noted in step 5.
«
Press [STORE] again.
The Program is now stored.
At this point your edited Program is stored, however the Mix your were auditioning
before storing the Program still has the old Program number assigned (if the edited
Program was saved to a different Program number location). Therefore, you need to
store the Mix as well.
»
Press [MIX].
This selects Mix Play Mode.
...
Press [STORE] twice.
The Mix is now stored.
38
BANK] and [BANK ] buttons to select the User Bank. If a RAM card
BANK] and [BANK
] to advance the cursor to the Program Number field in the
] buttons to select a Card Bank.
SavePrg? (STORE) to USERxxx"
QS6 Reference Manual
where XXX is
] to select