Hunter Hydrawise HCC-800-PL Owner's Manual page 40

A dialogue box will appear for you to enter your custom flow meter details. Make sure you
enter the calibration details for your custom pulse-based flow meter. Please refer to the
manufacturer specifications to find out the calibration. Otherwise, you will not get accurate
readings to display on your flow data.
NOTE: For our system to detect the correct flow data and reflect it on your Dashboard reports, any third-party
flow meter used must be a true pulse flow meter or have a reed switch. We aim for a minimum of 10 pulses per
min and a maximum of 120 pulses per min. That means if the flow rate was 10 gal per min, 1 pulse per gallon
needs to be set.
When using a third-party flow meter, please ensure it meets the specs above and is
calibrated correctly. Otherwise, data will not reflect accurately in reports. Also, note that the
Copyright 2020 Hunter Industries. All Rights Reserved. 40