Step 4: Store The Program - Alesis DEQ224 Reference Manual

3. Use the [DOWN] BUTTON to reduce all of these
frequencies until their LEDs are at -12 dB.
4. Select all of the unedited frequencies and boost them as high
as you can without clipping the signal.
5. Be sure to toggle the [BYPASS] button to compare the result
with the original.

Step 4: Store the Program

Once you have created an interesting program, you can save it to
one of the 30 User program locations. Here's how to do this:
1. Press the [STORE] button to enter Store mode.
2. Use the [DOWN/UP] buttons to select the new location for
the edited program. For your convenience, programs 51-59
have been left "blank" so you can store your editing
experiments somewhere without fear of overwriting a
program you might want to use later.
3. Press the [STORE] button again to store the program to the
new location.
For a detailed explanation on how to use this mode, see page 36.
Quick Start Guide
Programs 51-59 have been left
"blank" so you have
somewhere to store your
programs right away.
1
17