Advertisement
1. Bolt (1/4 x 5/8 inch)
2. Locknut (1/4 inch)
3. Bolt 1/4 x 5/8 inch and
locknut (1/4 inch)
4. Brace
5. Washer (1/4 inch)
9.
Loosely secure the tops of the braces and posts
to the rear bow using 4 bolts (1/4 x 5/8 inch) and
locknuts
(Figure
10.
Install the remaining 2 bolts (1/4 x 1 inch)
through the bottom holes on the braces and
secure them with locknuts
11.
Insert the posts into the receiver brackets.
Note:
Apply wax to the ends of the posts for
ease of insertion and removal.
Important:
Remove the sunshade before
hauling the machine.
12.
Tighten all of the fasteners.
13.
Secure the rear screen to the rear bow and
posts
(Figure
4).
Figure 3
6. Bolt (1/4 x 1-1/4 inches)
7. Locknut (1/4 inch)
8. Bolt (1/4 x 1 inch)
9. Post
3).
(Figure
3).
1. Rear screen
14.
Slip the sunshade over the front bow and pull
it back over the rear bow
top bow up or down to tighten or loosen the
g309690
sunshade.
1. Sunshade
15.
Install the previously removed wheels; torque
the lug nuts to 95 to 122 N∙m (70 to 90 ft-lb).
2
Figure 4
(Figure
5). Angle the
Figure 5
g309691
g309692
Advertisement
