Advertisement
Connecting the Solar Panels in Parallel or in Series
Wire solar panels in parallel
(refer to the figure below)
Solar Panel A
Wire solar panels in series
(refer to the figure below)
1. Connect the positive poles of the two solar panels with the MC4
parallel cable and repeat the step for the negative poles.
2. Connect the parallel cable connectors (output side) with the
MC4 connectors of the Solar Charging Cable (MC4 to XT60
cable) respectively.
3. Connect the XT60 connector on the Solar Charging Cable(MC4
to XT60 cable) to the XT60 port on the portable power station
to recharge the unit.
3
Solar MC4 parallel connection cable
* Users have to buy the solar panels and other
parallel connection accessories seperately.
2
1
1
2
1
1
1. Snap the male connector of one solar panel into the female
connector of the other respectively to wire the three solar panels
in series.
2. Wire the two connectors that are unwired in step 1 with the Solar
Charging Cable (MC4 to XT60 cable) respectively.
3. Connect the XT60 connector on the Solar Charging Cable (MC4
to XT60 cable) to the XT60 port on the portable power station
to recharge the unit.
2
1
1
2
*For more information and methods about solar charging,please refer to the user manual of the specific portable power station.
Solar Panel B
3
Advertisement
