Performance; Selecting A Program - Alesis airFX Reference Manual

Selecting a Program

The Alesis airFX contains 50 programs for adding a variety of new
effects to the incoming signal. There is a list of program names printed
on the bottom of the unit, and you should have received a program
chart with the unit that describes each program.
Selecting a new program is simple:
1. Turn the program knob on the bottom left side of the airFX to select
a program number. The new program will not load right away,
allowing you to keep using one program while you find another.
Notice that there is a decimal point after the program number to indicate
that it hasn't been loaded yet.
2. Briefly press the Program knob to load this new program.
The decimal point goes away, showing that the program has been loaded.
FX R M
AIR EFERENCE ANUAL
Chapter 3: Performance
P
ERFORMANCE
12.
12
C 3
HAPTER
21