Declaration Of Conformity - Steinbach Comfort 50 Original Owner's Manual

040818 - Valve lever
1
040820 - 7-way valve, blue
2
040828 - Spider gasket for 7-way valve
3
040816 - Disk (eliminator)
4
040813 - Locking ring, right
5
040811 - Bolt
6
040812 - Locking ring, left
7
040814 - Filter vessel seal
8
040810 - Wing nut
9
040803 - Filter vessel
10
040805 - Divider
11
040801 - Screen
12
040802 - Drain screw for filter vessel, blue
13
040978 - Attachment set for filter pumps
14
040800 - Base plate
15
040917 - Filter pump SPS 100-1T
16
040946 - hose clamp Ø 30 – 50 mm
17
040923 - Connection hose L = 48 cm, Ø 38 mm
18
040906 - Screw top with seal
19
040909 - Manometer 1/8" for Comfort series
20

Declaration of Conformity

Steinbach International GmbH hereby declares that the filter pump meets
the following directives:
- EMC Directive (2014/30/EU)
- EN55014-1: 2017; EN55014-2: 2015; EN61000-3-2: 2014; EN61000-3-3: 2013
- AfPS GS 2019:01 PAK
- EN 60335-2-41: 2003 / A2:2010; EN 60335-1:2012 / A2: 2019; EN 62233:2008
- EC Directive (2014/35/EU)
You can request the complete text of the EU Declaration of Conformity from the address
stated at the end of this instruction manual.
70