Winter Storage; Cleaning - Steinbach Comfort 50 Original Owner's Manual

5. Remove the battery.
6. Replace the battery.
You can find the battery type needed in the "Technical data" section.
7. Replace the cover.
8. Screw in the screws clockwise.
The timer battery is exchanged.

Winter storage

Always store the dried filter medium separately from the filter vessel in the
winter.
1. Press the ON/OFF button
2. Pull the power plug of the pump
3. Close the shut-off valves or block the water flow to the pool's connecting hoses.
4. Uninstall the connecting lines to the pool and drain the hoses.
5. Loosen the drain screws
6. Remove the filter medium (see "Exchanging the filter medium" section).
If you are using filter balls, wash them by hand and let them dry completely.
7. Rinse the filter system with tap water.
8. Let the filter system dry completely.
9. Press and hold down the valve lever
10. Turn the valve lever to the "WINTER" position and let go.
The device can be stored over the winter.

Cleaning

Improper cleaning might damage the device.
- Clean the surface of the device with plain water after each use.
- Do not use any aggressive cleaning agents.
- Do not use any sharp or metal objects such as knives, hard
scrapers or similar.
- Do not use any cleaning brushes.
- Do not use a high-pressure cleaner.
to switch off the pump
38
.
10
on the pump housing and completely empty the pump.
28
on the valve head
35
NOTICE!
.
10
.
1
63