Table of Contents
Advertisement
E5V2_UM_GB_29-07-05
9/08/05
11:19
6.3
Available options
From the list of names in your directories, you can access the following options via the left softkey:
View
•
View a complete file: name,
address, e-mail, etc.
Create file
•
Create a file (name, numbers,
address, e-mail, etc.) in the
desired directory.
Call
•
Once you have entered the
number, you can call directly
from the directory.
Write
•
Send an SMS/MMS/VMS/IM/e-
message
mail to a contact from the
directory.
Modify
•
Modify the contents of a file.
Image
•
Select a video/photo/image in
the Album and assign it to the
current file (not valid for the SIM
directory).
Delete
•
Delete the selected file.
Classify file
•
Move a file from one directory
to another.
Dir. ringtone
•
Assign a melody to the current
directory.
(1)
Depending on your network operator.
Page 35
Create dir.
•
Create your own directory.
Empty dir.
•
Empty the contents of a
directory.
Delete dir.
•
This directory and its files will
be completely erased (created
directory only).
Copy all->
•
Copy the whole directory to the
SIM/Phone
SIM or telephone directory in
one go if there is sufficient
memory.
Voice reco.
•
Record a voice recognition
command except in the SIM.
Send
•
Exchange data via infrared (see
page 65) or Multimedia/MMS.
Remote
•
The files in the directory may be
synchro.
synchronised with a network
store (see page 66)
(1)
.
Default num.
•
Select the telephone number in
your contact file that you want
to be displayed under the name
of the contact.
35
6.4
Creating a new directory
From the product directory, press the "Options" softkey and select "Create dir.", confirm using the
key, then name your new directory. You can create up to 13 new directories. You can delete only those
directories that you created, by selecting "Delete dir.".
6.5
Voice recognition
Voice recognition allows you to place your call by pronouncing the party's name without using your
directory.
Select a file from the product directory and confirm with the "Options" softkey. Then select "Voice reco."
and confirm once again. Three different beeps will signal the start of recording, its failure or its success. After
recording, you can "Listen to", "Replace" or "Delete" a recorded voice recognition command.
The files for which a voice recognition command has been recorded are indicated by the
The number of names accessible through voice recognition is limited. This feature can be used in
all directories except the SIM card directory.
Activate voice recognition by holding down the
on the screen.
key from the main screen, then follow the instructions
36
icon.
Advertisement
Table of Contents
