Symbols And Technical Data; Assembling The Welding Screen - Parkside P-ES 120 Operation And Safety Notes

Anleitung_1549052:_ 15.12.2009
The walls in the immediate vicinity of
stationary workplaces may not have a light
color or a sheen. Windows up to head
height are to be protected against radiation
passing through them or reflecting off them,
for example by coating them with a suitable
paint.

4. Symbols and technical data

EN 60974-6 European standard for arc
welding sets and welding
power supplies with limited
on time (part 6).
Symbol for welding power
S
supplies which are suitable
for welding in
environments with
increased electrical
danger.
~ 50 Hz Alternating current and
rated frequency value [Hz]
U Rated idling voltage [V]
0
40A/19.6V - 80 A/21.2 V
Maximum welding current
and the corresponding
standardized operating
voltage [A/V]
Ø Electrode diameter [mm]
I Welding current [A]
2
t Average load time [s]
w
t Average reset time [s]
r
Line input; number of
phases, the alternating
1~ 50 Hz
current symbol and the
rated frequency value
14:47 Uhr Seite 9
U
1
I
1max
I
1eff
IP 21S
H
Mains connection:
Welding current (A) at cos ϕ= 0.73:
ø (mm)
I
2
t (s)
w
t (s)
r
Idling voltage (V):
Power input:
Fuse (A):
Weight:
The welding times apply for an ambient
temperature of 40° C.
5. Assembling the welding
screen (fig. 2-5)
Insert the safety glass (9) and then the welding
glass (10) in the welding screen (8). Now fasten
the welding screen holder (11) to the welding
screen, as shown in fig. 5.
GB
Do not store or use the
equipment in wet or damp
conditions or in the rain.
Use the equipment only
indoors.
Line voltage [V]
Highest rated value of the
line current [A]
Effective value of the
highest line current [A]
Protection type
Insulation class
230 V ~ 50 Hz
40 - 80
1.6 2.0 2.5
40 55 80
217 116 64
1450 1381 1351
48
4 kVA at 80 A cos ϕ = 0.73
16
10.6 kg
9