Related Manuals for Challenge Xtreme CX-CS 860 L
Summary of Contents for Challenge Xtreme CX-CS 860 L
- Page 1 Original Operating Instructions Mini Hand-Held Circular Saw 860 L Art.-Nr .: 43.309.59 I.-Nr.:11011 CX-CS Helpline No 0844 801 8701 / IRE 189 094 6244...
-
Page 2: Table Of Contents
Contents Page 1. Safety information 2. Layout and items supplied 3. Intended use 4. Technical data 5. Before starting the equipment 6. Operation 7. Replacing the power cable 8. Cleaning, maintenance and ordering of spare parts 9. Disposal and recycling 10. -
Page 3: Safety Information
“Caution - Read the operating instructions to reduce the risk of inquiry” Wear ear-muffs. The impact of noise can cause damage to hearing. Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Wear safety goggles. - Page 4 General safety instructions for electric tools shock. 3. Safety of persons CAUTION: Read all safety regulations and a) Be careful, watch what you are doing and instructions. Any failures made in following the use an electric tool sensibly. Do not use the safety regulations and instructions may result in an tool if you are tired or under the influence of electric shock, fire and/or serious injury.
- Page 5 of children. Do not allow people who are not live cable will also make the metal parts of the familiar with the appliance or who have not appliance live and will cause an electric shock. read these instructions to use the appliance. Always use a stop or a straight edge when carrying out longitudinal cuts.
- Page 6 Find the reason for the blade jamming and rectify the floor unless the bottom guard hood is covering the blade. An unprotected, moving it by suitable means. c) If you wish to restart a saw that is already in saw blade will cause the saw to move opposite to the workpiece, center the saw blade in the the sawing direction and saw through anything in saw gap and check that the saw’s teeth are...
- Page 7 CAUTION Read all the safety regulations and instructions. Any errors made in following the safety regulations and/or serious injury. Keep all safety information and instructions in a safe place for future use. Important: Laser radiation Do not look into the beam Laser class 2 CAUTION: LASER RADIATION.
-
Page 8: Layout And Items Supplied
2. Layout and items supplied 13. Flange (Fig. 1/1a - 1d) 14. ON/OFF switch for laser 15. Laser 2.1 Layout 1. Handle 2.2 Supplied package 2. ON/OFF switch 3. Locking button • Open the packaging and take out the 4. Locking screw for cutting depth setting equipment with care. - Page 9 IMPORTANT The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating! B Parallel stop C Adapter for dust extraction system D Allen key (2x 4mm) E Additional Saw blade (80 Teeth) F Original operating instructions D (2x)
-
Page 10: Intended Use
3. Intended use Additional information for electric power tools Warning! The mini hand-held circular saw is designed for sawing straight cuts in wood, wood-type materials accordance with a standardized testing method. It and plastics. may change according to how the electric equipment is used and may exceed the d value in The equipment is to be used only for its prescribed... - Page 11 5.1 Setting the cutting depth (Figure 2) Attach the adapter for the dust extraction system Undo the locking screw for setting the cutting (11) to the connection for the dust extraction depth (4). system (10). You can then connect a suitable vacuum cleaner Set the cutting depth in accordance with the scale (a).
- Page 12 Helpline No 0844 801 8701 / IRE 189 094 6244...
-
Page 13: Operation
6.2 Using the mini hand-held circular saw (Fig. 6) 6. Operation (Fig. 6) Select a suitable blade for the material you wish to saw. 6.1 Working with the mini hand-held circular saw Check the condition and sharpness of the blade. Always hold the mini hand-held circular saw Set the cutting depth. - Page 14 6.5 Using the laser (Fig. 8-9) The laser (15) enables you to make precision cuts with your circular saw. The laser light is generated by a laser diode. The laser light is enlarged to form a line and is emitted through the laser emission aperture.
- Page 15 6.6 Replacing the drive belt (Fig. 10-11) The drive belt (B) must be replaced if it is worn. Undo the screw (a) and remove side belt cover (A). Remove the worn drive belt (B) and clean the two belt pulleys (C/D). Place the new drive belt on the belt pulley (C) and pull the belt onto the belt pulley (D) whilst turning the shaft.
-
Page 16: Replacing The Power Cable
8.4 Ordering replacement parts: 7. Replacing the power cable Please provide the following information on all orders for spare parts: If the power cable for this equipment is damaged, it Model/type of the equipment CX-CS 860L must be replaced by the manufacturer or its after- Article number of the equipment 43.309.59 sales service or similarly trained personnel to avoid ID number of the equipment 11011... - Page 17 Never place any electric tools in your household refuse. To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and its implementation in national laws, old electric tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g.
-
Page 19: Guarantee
GUARANTEE CERTIFICATE Dear Customer, In the unlikely event that your device develops a fault, please contact our Customer service department on the telephone number shown below. 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. - Page 20 The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH. Technical changes subject to change Helpline No 0844 801 8701 / IRE 189 094 6244...