STILFORD ELECTRIC HEIGHT ADJUSTABLE DESK S2 User Manual

ELECTRIC HEIGHT ADJUSTABLE DESKS

1. Stroke Reset

After the initial assembly of the desk or if the display shows either of "E10, E20 or E60",
press the
move down to the lowest
is then finished and will display the lowest height

2. Lifting

The desk will go up and down when pressing

3. Height memory setting

Move the desk up or down to a desired position. Press the
display will blink, then press a numeric key (
to the corresponding preset position. The display will stop blinking and exit the memory
mode if there is no numeric key pressed within 5 seconds.
Once you have saved the desired
move the desk to the saved height.

4. Setup Mode

1. Press and hold the
2. Press the
to select menu, and press "S" into menu.
 Unit（
 Brightness（ ） : Brightness of the controller;
User Manual
button for 5 seconds until it shows
and rebound back up. The learning process & stroke reset
position
height
button for 5 seconds, display will show "S--" and blink.
button to move through the below setup menu functions, then press
） : Display height on screen in centimeters or inches;
, the desk will automatically
position (067) .
or .
, ,
) to save the desired height
you can press that numeric key to automatically
1 / 3
1
button after which the