Operation - Quer CRUISER 2.0 Owner's Manual

This vehicle establishes equilibrium based on build-in gyroscope and acceleration
sensors. The basic principle for operating this device is balancing user's body center of
gravity (leaning forward, backward).
Step 1: Set the vehicle on flat and stable surface. Press the power
button to turn it on. The vehicle can face either direction. The
battery indicator on the top of the device will turn green.
Note: after switching the vehicle on, the solid blue lights will
be on, and they will stay that way until the vehicle is switched
off. The red lights turns on only when driving, and they will
flash any time the vehicle turns right or left.
Step 2: Step your dominant foot on the platform. The operation
indicator will turn green. Use the foot to level the platform and
activate the balancing system. The balancing system will not
activate until the platform is level.
Step 3: Then step on the other foot. You're ready to drive!
Step 4: Lean forward to move forward/speed up; lean back to move
backwards/slow down. Remember not to make sudden moves.
Note: do not drive when the operation indicator turns red. Red indicator signalizes
an error or a fault in operation.
Step 5: Move the right foot slightly forward to turn left; move the left foot slightly forward
to turn right.
Owner's manual

OPERATION

Operation steps:
EN
15