Bachmann Williams GP-38 Instructions

Dummy diesel locomotive

Download this manual

Thank you for purchasing a Williams by Bachmann® locomotive. This locomotive has been manufactured to provide

years of use and enjoyment. Please follow the simple instructions below.

Before operating, please lightly lubricate the points shown in the diagram below. Do not over-lubricate and take extra care

to avoid getting lubricants on the wheel surfaces.

1. For the axles and coupler pivot points Marked A, we recommend that you lubricate with a small amount of light

oil such as Bachmann E-Z Lube® #99984 Light Gear Oil. Do not over-lubricate.

2. For areas that require electrical flow, such as roller pick-ups Marked B, please use Bachmann E-Z Lube®

#99981 Conductive Contact Lube. Never use any Teflon® based oil on these areas because this type oil has

insulating properties.

1400 East Erie Avenue, Philadelphia, PA 19124 USA

Customer Service Telephone 800-356-3910

GP-38 DUMMY DIESEL LOCOMOTIVE INSTRUCTIONS

Bachmann Industries, Inc.

www.bachmanntrains.com

– Page 1 of 2 –

Page 1 Bachmann E-Z Lube® #99984 Light Gear Oil. Do not over-lubricate. 2. For areas that require electrical flow, such as roller pick-ups Marked B, please use Bachmann E-Z Lube® #99981 Conductive Contact Lube. Never use any Teflon® based oil on these areas because this type oil has insulating properties.
Page 2 This locomotive uses a 12 volt bayonet style bulb. The standard replacement bulb number is 53. Power Upgrade Kit A power upgrade kit, Williams by Bachmann® #00241, is available to convert this dummy unit into a powered unit. Please follow the installation instructions that are included with the kit.
Page 3 Bachmann Industries, Inc. 1400 East Erie Ave, Philadelphia, PA 19124 USA www.bachmanntrains.com Customer Service Telephone 800-356-3910 Part Number Description Number Used GP-38 BODY & BODY PARTS 809-M001 Metal Frame w / handrails 1-30100DFT 1-30100DFT Screw(Mounts Body to Frame) Screw(Mounts Body to Frame)