Approved Power Tool Attachments - Stihl FS 85 Instruction Manual

English
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments, deflectors, handles and
harnesses shown in each row of the
table may be used together. No other
combinations are permitted because of
the risk of accidents.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 20 - 2
2 STIHL AutoCut C 25 - 2
3 STIHL AutoCut 25 - 2
4 STIHL AutoCut C 26 - 2
5 STIHL TrimCut 31 - 2
6 STIHL DuroCut 20 - 2
7 STIHL PolyCut 20 - 3
Metal cutting attachments
8 Grass cutting blade 230 - 2
(230 mm dia.)
9 Grass cutting blade 260 - 2
(260 mm dia.)
10 Grass cutting blade 230 - 4
(230 mm dia.)
11 Grass cutting blade 230 - 8
(230 mm dia.)
12 Grass cutting blade 250 - 40 Spezial
(250 mm dia.)
64
13 Brush knife 250 - 3
(250 mm dia.)
14 Scratcher tooth circular saw blade
200
(200 mm dia.)
15 Chisel tooth circular saw blade 200
(200 mm dia.)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
16 Deflector for mowing heads
17 Deflector with
18 skirt and blade, for mowing heads
19 Deflector without skirt and blade, for
metal cutting attachments, items 8
to 13
20 Limit stop for circular saw blades
Handles
21 Loop handle
22 Loop handle with
23 Barrier bar
24 Bike handle
Harnesses
25 Shoulder strap may be used
26 Shoulder strap must be used
27 Full harness may be used
28 Full harness must be used
Approved Power Tool
Attachments
The following STIHL attachments may
be mounted to the basic power tool:
Attachment Application
BF Cultivator with pick
tines
2) 3)
FCS Edger
FH Power scythe,
adjustable
1)
HL 0° Long reach hedge
trimmer
2)
HL 145° Hedge trimmer,
adjustable
1)
HT Pole saw
1) 4)
SP Special harvester
1)
SP 10 Special harvester
1) 5)
SP 20 Special harvester
1)
Not approved for models with bike
handle
2)
Limited suitability for models with
bike handle
3)
It is not necessary to use the
shoulder strap
4)
Use handle hose supplied with the
machine
5)
Use flexible shaft supplied with the
attachment
FS 85, FS 85 R