Advertisement
Step 1:
Ensure that the dock is unlocked. If locked,
insert key and rotate lock 90 degrees counter-
clockwise.
Step 2:
Use your thumb to push the latch in the front.
This will push the back clamp out and the
laptop will eject with a small click sound.
Once the laptop ejects, gently pull the laptop
out of the dock
Cable Management & Mounting
Connect all cables securely to dock ports,
and use tie straps to secure cables to the
"Cable Management Plate" as shown.
The Cable Management Plate has slots, so
if needed, the location can be adjusted
slightly.
Undocking the Laptop
The standard mounting bracket that comes
with the vehicle dock features an industry
standard VESA 75mm x 75mm bolt pattern.
This allows easy mounting to many pre-
existing mounts as well as dedicated mounts
from Gamber-Johnson. Use the supplied
#¼-20 hardware for attaching it to the mount.
Attach the mounting bracket to the dock using
the 4 supplied #10-24 UNC screws as shown
above (after attaching the mounting plate to
Gamber-Johnson mount)
Advertisement
