Advertisement
General Instructions
POWER:
• The power input should be 15.6Vdc / 7.05 A. The dock is meant to operate on 14.5 Vdc
to 16 Vdc. Use a recommended power supply for the dock. Panasonic recommends
using a LIND Auto Adapter (LIND part no: PA 1580-1745) for this dock.
WIRING:
• Gamber-Johnson does not recommend relying on a cigarette socket adaptor for powering
vehicle docks. We recommend hard wiring using a good clean ground direct from the
vehicle battery (-) post, and (+) supply from a fused 12v location also directly from the
vehicle battery. All Peripherals connecting to the docking station should get power and
ground from the same location as the dock.
• Visit
www.gamberjohnson.com
• This equipment is not suitable for use in locations where children are likely to be present
SERVICING [ENTRETIEN]:
• If the dock does not work as intended, please contact Gamber-Johnson for
troubleshooting or to schedule a service. [Si le dock ne fonctionne pas comme prévu,
contactez Gamber-Johnson pour le dépannage ou pour planifier un service.]
• Servicing of the dock should be only done by authorized service center personnel.
Unauthorized servicing of the dock will void its warranty. [L'entretien du dock ne doit être
effectué que par le personnel du centre de service autorisé. Un entretien non autorisé du
dock annulera sa garantie.]
EXTERNAL ANTENNA:
• For DPT (Dual Pass Thru) models, there is an option to turn off the external antenna. This
switch is located next to power port of the dock. Toggle the switch gently – excess force
might break the switch. Turning off the external antenna will let the computer use in-built
antenna. By default, the dock comes with the switch in ON position.
for a copy of our general wiring and troubleshooting guide.
Advertisement
