Parts And Functions - Panasonic WV-X4173 Basic Information

Parts and functions

„ Terminals
【5】
S4151
X4173
Audio cable connector
{1} RJ45 Network terminal
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the network terminal.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
•
X4173 S4151
for power supply, 12 V DC will be used for power supply.
• When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
{2}
S4151
X4173
Connect the output cable of the AC adaptor to the power supply terminal (accessory) and attach it
to the camera.
IMPORTANT:
• Be sure to use the power cable plug (accessory) provided with this product.
• Be sure to fully insert the power cable plug (accessory) into the power supply terminal (12 V
DC). Otherwise, it may damage the camera or cause malfunction.
• When installing the camera, make sure that excessive force is not applied to the power cable.
• Be sure to use an AC adaptor compliant with the Specifications (written in the indication label
on the bottom side of this unit) regarding power source and power consumption.
【1】
【2】
When connecting both the 12 V DC power supply and the PoE device
Power supply terminal (12 V DC)
{1} RJ45 Network terminal
{2} X4173
terminal (12 V DC)
{3} X4173
X4173
{4}
{5} X4173
EXT I/O terminal plug
8
S4151
Power supply
S4151
Audio input cable
S4151
Audio output cable
S4151
EXT I/O terminals/
X4173 S4151
Audio cable (accessory)
【3】
【4】