Schill FT 260 Installation And Operating Instruction
Automatic cable rewinder
Hide thumbs
Also See for FT 260:
- Installation and operating instruction (17 pages) ,
- Installation and operating instruction (13 pages) ,
- Installation and operating instruction (9 pages)
Table of Contents
Related Manuals for Schill FT 260
Summary of Contents for Schill FT 260
- Page 1 FT 260/350 - EFT 265 MFK installation and operating instruction page 1 01.04.2021 installation and operating instruction FT 260_350-EFT 265 MFK - A5 Schill GmbH & Co. KG; Bruckstraße 44; 70734 Fellbach www.schill.de...
-
Page 2: Maintenance
FT 260/350 - EFT 265 MFK installation and operating instruction INTRODUCTION All information necessary for a correct assembly to ensure trouble free operation of the cable reel are described in the present operating instructions. The warranty given by the manufacturer is only valid if these operating instructions are observed and adhered to. Terms and conditions are available upon request or at https://www.schill.de/en/footer/general-terms. -
Page 3: Locking Device
FT 260/350 - EFT 265 MFK installation and operating instruction LOCKING DEVICE As a standard feature the cable reel has a disengageable cable locking device. The latching mechanism ensures that the pulled-out cable stays without traction fixed in place. When the cable is being pulled out, the spring detent passes over a series of grooves. An audible click indicates that the locking device is engaged. -
Page 4: Cable Installation
FT 260/350 - EFT 265 MFK installation and operating instruction FT 350 Starting from a standard spring, with a maximum of 29 revolutions, the following pull-out and connection lengths are possible. cable OD [mm] pull-out length [m] connection length [m] ≤... - Page 5 FT 260/350 - EFT 265 MFK installation and operating instruction Additional information with respect to cable types, spring tensions, power loads and weights can be found on the product rating plate, in our current product catalogue and on our website https://www.schill.de/en/...
-
Page 6: Installation Height
FT 260/350 - EFT 265 MFK installation and operating instruction INSTALLATION HEIGHT The installation height of the cable rewinder is not limited. The maximum extension length is the specified cable length. The standard cables are designed to withstand the weight of the extended cable included cable stopper. Additional tensile forces (cause by additional weights for example) are not permitted. - Page 7 FT 260/350 - EFT 265 MFK installation and operating instruction INSTALLATION INSTRUCTIONS EST 265 EST 265 is screwed to the mounting surface via 4 holes on the housing. INSTALLATION INSTRUCTIONS FT 350 Wall mounting with universal holder WB 038/350 The cable reel can be rotated 150°...
- Page 8 FT 260/350 - EFT 265 MFK installation and operating instruction Wall holder WB 038/350 Ceiling holder DB 350 The ceiling holder DB 038 is not included and is available as an accessory. Wall holder WB 038 is included in the scope of delivery, but no fastening screws.
- Page 9 FT 260/350 - EFT 265 MFK installation and operating instruction EFT 265 FT 350 The dimensions, weights, lengths, coloures and traction are subject to modifications. We cannot rule out discrepancies and we reserve the right to make technical changes to the product without giving advance notice.
-
Page 10: Tightening Torque
FT 260/350 - EFT 265 MFK installation and operating instruction TIGHTENING TORQUE Gehäuseschrauben electrical connections 0,8 Nm 0,5 Nm cover screws electrical connections Achsschraube MS grinding ring nut M3.5 1 Nm 0,3 - 0,35 Nm axle screw...
Need help?
Do you have a question about the FT 260 and is the answer not in the manual?
Questions and answers