Table of Contents
Advertisement
B
Resume cruise control
C
Start control with current speed/Reduce
limit
D
Show menu of assist systems - Possibility of
switching between cruise control and speed lim-
iter
Accelerate temporarily
›
Depress the accelerator pedal.
Releasing the accelerator pedal will cause the speed
to drop again to the set speed.
Interrupting cruise control
After pressing the brake pedal
▶
After an ESC intervention
▶
Troubleshooting
Cruise control system faulty
illuminates
›
Seek the help of a specialist garage.
Adaptive Cruise Control (ACC)
Functionality
ACC control
ACC maintains the set speed. When your vehicle ap-
proaches the vehicle in front, ACC will automatically
start to maintain the set distance to this vehicle.
Maintaining the set speed and the distance will here-
inafter be referred to as Control.
WARNING
ACC does not respond to crossing or oncoming ob-
jects.
ACC is intended primarily for use on motorways.
pACC (predictive cruise control)
pACC represents an extension of the ACC system.
pACC adjusts the speed according to recognized
speed limits and the route, e.g. curves, intersections
or roundabouts.
The system uses the following sources to evaluate
the situation:
Navigation data
▶
Traffic Sign Recognition
▶
Sensors, radars and cameras
▶
WARNING
pACC does not respond to railway crossings.
If no speed is set, the current speed is adopted.
1)
Driver assist systems ›
Speed range
1)
/Increase speed
Depending on the equipment, ACC allows a speed
setting in the range of 30-210 km/h.
If control is started at a speed of less than 30 km/h,
the speed is automatically increased to 30 km/h or
controlled according to the speed of the vehicle
ahead.
Distance level
The distance to the vehicle ahead can be adjusted to
five different levels.
▶
Automatic stop and start
The vehicle can be decelerated to a stop using the
ACC and start moving again. Control is disconnected
in case of longer holding periods.
To resume the regulation:
›
Or:
›
Or:
›
The control is interrupted when the brake pedal is
depressed.
Overtaking
If your vehicle changes to the fast lane and no vehi-
cle is detected in front, ACC accelerates up to the
set speed.
Status display in the instrument cluster display
When the control starts, the set speed is displayed.
›
Adaptive Cruise Control (ACC)
WARNING
Maintain a minimum distance in accordance with
the country-specific legal regulations.
Depress the accelerator pedal.
Set the lever in position
Applies to vehicles with hand recognition on the
steering wheel: Grab the steering wheel again.
illuminates - ACC is activated
illuminates - Control is active
illuminates - ACC does not decelerate suffi-
ciently
Depress the brake pedal.
illuminates - ACC controls the driving speed ac-
cording to the permissible speed
illuminates - ACC controls the driving speed ac-
cording to the approaching roundabout
illuminates - ACC controls the driving speed ac-
cording to the approaching junction
illuminates - ACC controls the driving speed ac-
cording to the road
141
.
Advertisement
Table of Contents
