Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HiWeigh X3ARM
Summary of Contents for HiWeigh X3ARM
- Page 1 Weight Indicator X1.X3(A).X5-RM-GM User Manual v.201802 An ISO9001 registered company @No.335 Haishen, Xingxin Road, Huinan Town, Pudong District, Shanghai 201301, China www.hiweigh.com All rights reserved, specifications subject to change without notice...
-
Page 3: Safety Precautions
1 Introduction Safety precautions WARNING! ▲ Do not use X*(W)(R)(G)M Series indicators in hazardous area or in dusty environments. ▲ Never flood the Indicator, immerse it in liquid or pour liquids on it. ▲ Do not expose indicator to either direct sun light or any heat sources. ▲... -
Page 4: Specifications
2 Specifications Accuracy class • III Maximum number of verification scale intervals • nind = 3000 Load cell excitation voltage • Uexc = 5 V Minimum input voltage • Umin = 0.5 mV Minimum input voltage per verification scale interval •... -
Page 5: Front Panel
Front Panel 1.1 Status Indicators Status Meaning AC adapter is connected Low battery warning 30% of full charge Weight is stable A weight is tare and display net weight →0← -1/4 e < weight < 1/4 e set point A ≤ weight < set point B set point B ≤... - Page 6 →T← Tare →0← Zero 1.3 LED Error Code Code Meaning OUEr Weight > FS + 9d –OUEr Weight < -20d Error Calibration error Low battery warning (<10% of full charge) to recharge the battery "23.12" blink In zeroing operation,weight<-2%FS LLLLLL In zeroing operation,weight>2%FS HHHHHH Basic functions...
-
Page 7: Simple Weighing
2.5.2 Remove tare 1. Check that the tare status NET is displayed. 2. Press to remove tare and switch to gross weight mode. 2.6 Simple weighing 1. Place sample on the platform. 2. Wait until the weight is stable when the stable status is displayed. -
Page 8: External Interfaces
set point C ≤ weight < set point D 3.2.1 Enter set points Step Operation Display Description 0.00 Switch off the indicator Press Press and hold Switch on the indicator to enable set point menu 0.00 →T← and then press Press →T←... - Page 9 Pin No. Indicator 4.2.3 Connecting DB9 to PC DB9 Indicator DB9 Pin No. DB9 Pin No. 2 (RxD) 3 (TxD) 3 (TxD) 2 (RxD) 5 (GND) 5 (GND) 4.2.4 RS232 / RS485 CN5A connectors Pin No. RS485 RS485 RS232 RS232 RS232 CN5A 4.2.5 Connecting CN5A to PC DB9...
- Page 10 No:XXXX G:XXXXXXkg G: 88.69kg T:XXXXXXkg T: 29.41kg N:XXXXXXkg N: 59.28kg Accumulated weight No:XXXX W:XXXXXXXkg W: 118.09kg Model Numbers Model Housing IP65 X3ARM Plastic X3AGM Plastic Green X3RM Stainless Steel X3GM Stainless Steel Green X3WRM Stainless Steel X3WGM Stainless Steel Green...
- Page 12 X1.X3(A).X5-RM-GM User Manual An ISO9001 registered company @No.335 Haishen, Xingxin Road, Huinan Town, Pudong District, Shanghai 201301, China www.hiweigh.com All rights reserved, specifications subject to change without notice...
Need help?
Do you have a question about the X3ARM and is the answer not in the manual?
Questions and answers