Neslab Steelhead 1 Instruction And Operation Manual page 10

Pad Lock - Lockout
POWER - Amber
RS485
ON/OFF
NOTE:
HEATER HIGH TEMPERATURE MANUAL RESET
Resetting the button will automatically start the unit if the unit is in the
ON mode.
J1
Supplying the wrong voltage to any of the remote interface pins can
seriously damage the controller. Verify that the cable is plugged into the
correct port on the AMAT tool before beginning remote operation.
J2
J4 & J5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com