Sound; Custom Audio Adjustment - Aiwa AV-D67 Operating Instructions Manual

SOUND

CUSTOM AUDIO ADJUSTMENT

VOLUME CONTROL
Turn the VOLUME control on the unit, or press the VOL buttons
on the remote control.
The volume level is shown on the display for four seconds. It can
be adjusted between 0 and MAX (31). It flashes when set over
the level of 27.
The volume level remains memorized even after the power is
turned off. However, if the power is turned off when the volume
is set to 17 or more, it is automatically set to 16 the next time the
power is turned on.
To adjust the left/right balance of the front speakers
Press the BALANCE button to display "L/R 0dB". Then press
the N or M button repeatedly or turn the MULTI JOG within
four seconds.
Note that the front speaker balance for the DOLBY SURROUND
is also changed.
To mute the sound temporarily
Press the MUTING (MUTE) button (–20 dB).
"MUTE ON" appears on the display for four seconds. While muting
the sound, the selected function indicator flashes. Press the
MUTING button again to restore the sound.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
NOTE
Low-frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low-frequency sound is
originally emphasized. In this case, cancel the T-BASS system.
SOUND ADJUSTMENT DURING RECORDING
The output volume and tone of the speakers or headphones may
be freely varied without affecting the level of the recording.
En En En En En
E E E E E
(Españo (Españo
(Españo (Españo (Españo
F F F F F
(França (França
(França (França (França
8
ENGLISH