Seiko V175 Instructions Manual page 30

Adjusting the preliminary position of the stopwatch 1/5-second and minute hands
If any of the stopwatch hands do not return to the 0 minute 0 second
position when the stopwatch is reset, the preliminary hand position may be
misaligned.
The preliminary position of the stopwatch 1/5 second and minute hands is
0 minute 0 second.
The preliminary position may be misaligned due to the following reasons.
・ I n the case of a strong impact: Misalignment may occur when dropping or hitting the watch.
・ I n the case of a magnetic influence: Misalignment may occur when bringing the
watch close to an object which generates magnetism.
→ Examples of common magnetic products that may affect watches → page 101.
6
※ I f the preliminary position adjustment is carried out, the watch gains or loses time. After adjusting
the preliminary hand position, make sure to reset the main time.
114
4 Press button B to reset
the st op w at ch minut e
hand to 0 minute.
One minute
Press button B once and
Advance
then release it.
When button B is kept pressed for two
Continuous
seconds or longer, the hand will start moving.
Advance
When button B is released, the hand will stop.
※ I f the stopwatch minute hand is reset to
0 minute, continue to procedure
5
5 Press and hold button A (for 3
seconds) until the stopwatch 1/5
6
second hand starts moving.
The stopwatch 1/5-second hand
moves one full rotation, and the
watch enters the preliminary
position adjustment mode of the
stopwatch 1/5-second hand.
116
0 minute position
Press
button
Press and
hold button
A for 3
seconds
1 Make sure that the watch is operating.
Make sure that the second hand is moving at one-minute intervals. If the second hand is moving
at two-second intervals, or it has stopped, charge the watch by exposing the dial to the light.
→ About charging page 95.
Pull out the crown to the second click.
2
The second hand will stop.
second hand
※ I f your watch has a screw lock
type crown, unlock the crown.
→ Crown page 80.
3 Press and hold button A (for 3 seconds) until
the stopwatch minute hand starts moving.
The stopwatch minute hand moves one full rotation,
and the watch enters the preliminary position
adjustment mode of the stopwatch minute hand.
※ I f you do not know which hand is the stopwatch
minute hand, refer to Names of the parts and
functions on page 79.
6 Press button B to reset the stopwatch
1/5-second hand to 0 minute.
One minute Press button B once and then
Advance release it.
When button B is kept pressed for two
Continuous
seconds or longer, the hand will start moving.
Advance
When button B is released, the hand will stop.
※ I f the stopwatch 1/5-second hand is reset to
B. 0 minute, continue to the procedure
Push the crown back in to the
7
normal position.
Set the main time. → How to set the time and date page 82.
8
If the preliminary position adjustment is carried out, the main time may gain
or lose time.
When the main time is set, the operation is completed.
Pull out
the crown to
the second
click.
0 1 2
Continue to the next page
Press
button
7 .
Push
the crown
back in.
0 1 2
Press and
hold button
A for 3
seconds
6
115
B.
6
117