Clean the blade in the extraction as shown, from the
bottom, over the entire length. Insert the cloth or paper
as shown and pull upward on both sides. Then push back
the cloth or paper over the entire length and put it aside.
4.2 Cleaning Sensors
Dampen clean, absorbent and lint-free cotton cloths with distilled water and carefully wipe
The dust and other deposits from all sensors that are in the paper path.
2. Paper edge sensors on the turning frame
3. Synchronization sensors before the print head unit
4. Data integrity mark sensors downstream of the print head unit
5. Paper temperature sensor in the dryer (Only for printer 2)
Splice sensors on paper input (Only for printer 1)