4 Device Description
4.1 Overview
The converter has four connectors, four LEDs, two DIP switches, MicroSD card slot and a reset
button.
4.2
Power
The gateway can be powered externally via a DSUB connector or via a micro-USB connector.
LIN bus needs the external power. All Ground signals are connected.
When the external power is connected, the power from USB gets internally disconnected by a
MOSFET transistor. Thus, no power will be drawn from USB.
MACH SYSTEMS s.r.o.
Figure 4 Device Overview
Figure 5 Power Options
www.machsystems.cz
info@machsystems.cz
CAN FD LIN Gateway - User Manual
Page 7 of 18